The machine is the same as the car and needs maintenance. If the mechanical quality is good, if it is not maintained in time, it will be a problem. Familiar with the maintenance knowledge of the two-in-one rack and leveling machine, plus the correct operation and use of the two-in-one rack and leveling machine, the preconditions for the normal operation of the machine and the extension of the service life should be guaranteed.
Daily maintenance and maintenance of one and two-in-one rack and leveling machine:
1.For long-term use, the spindle bearing grease should be added once a month, and the gear oil should be replaced once every six months. The oil can be added to 1/3.
2.The two-in-one rack and leveling machine should be fully inspected after using for a period of time to check the tightness of all screw fittings.
3.If the steering fullness of the meter and the pointer is found, check whether the contact of the thermocouple and other edges is good.
4.The wiring points in the electric control box shall not be loose, so as to avoid burning the electrical appliances and affecting normal use, and no oil or water is allowed to enter.
5.long-term use, should pay attention to check the bearing seat, whether the screws are loose.
6.When not in use for a long time, the main shaft needs to add butter and check the electric control box.
Second, two-in-one material rack and leveling machine's precautions:
1.Turn on the power supply. First check that the power supply voltage is beam-matched, and if there is any lack of phase contact, etc., so as not to damage the electrical motor.
2.There should be reliable grounding to avoid injury when the appliance is damaged.
3.after loading the material, you should immediately remove the Yaoto, so as not to hurt when booting.
4.The power should be cut off during charging. After power-on, it is strictly forbidden to stand around the pallet to avoid accidents!